Software CAN Clip V212 for Renault - Dacia

The CAN Clip software is compatible with the diagnostic tool for RENAULT and DACIA vehicles.

>> Click here to access the Can Clip V212 diagnostic tool sheet

The diagnostic software is :

• CAN Clip V212 for all Renault and Dacia vehicles until October 2021, works only under Windows 7 in 32 bits.

Unlike other universal diagnostic tools that only read error codes or generic functions, this software performs almost ALL the functions of the original dealer diagnostic tool.

The only functions not included are the online operations that require access to the RENAULT servers.

This version of CAN Clip will allow you to perform the following operations:

• Read and clear error codes
• Reading of parameters (recording and graphic display)
• Test of actuators
• ECU configuration
• Coding (injectors, electronic valves, rim size, equipment level, etc.)
• Calibration and self-learning (drain interval calibration, EGR valve replacement, FAP, etc.)
• Reset of maintenance indicators
• Etc.

You can communicate with the following ECUs:

• Diesel/petrol injection
• Automatic gearbox
• Central Cabin Unit (UCH)
• ABS/ESP
• Airbag
• Air conditioning
• Instrument panel
• Comfort systems
• Power steering
• Controlled suspension
• Etc.

Engine :

• Engine ECU diagnosis
• Diagnosis of the injection computer (diesel, gasoline, flex-fuel, gas, etc.)
• Injector programming
• EGR valve calibration

Braking :

• Diagnosis of ABS and ESP ECUs
• Diagnosis and maintenance of the parking brake
• Brake system bleeding

Pollution :

• Diagnosis and regeneration of the particle filter
• Adblue module control
• Electronic control of pollutant emissions
• Lambda sensor check

Maintenance :

• Reset/initialization of the maintenance/change counter
• Bleeding of the various fluids (brakes, cooling)
• Read/clear engine faults
• Maintenance of the particle filter

Air conditioning :

• Complete diagnosis of the electronic and mechanical system
• Reading of the cooling system parameters
• Test of the controls

Ground handling :

• Electronic tire size configuration
• Electronic tire configuration (winter/summer)
• Tire pressure adjustment
• Electronic valve configuration
• Steering angle sensor calibration (steering angle initialization)

Safety:

• Activation of safety airbags (locking/unlocking)
• Configuration of a new airbag ECU
• Diagnosis of airbag ECUs
• Configuration of the rain sensor
• Configuration of the automatic headlight activation
• Activation of the xenon headlights
• Activation of the reversing radar

Equipment :

• Double dice
• Activation of the car radio
• Configuration of CD charger
• Alarm activation/configuration
• Hitch configuration
• Bicycle hitch configuration

Language supported by CAN Clip :

Austrian, Belgian, English, German, Danish, Spanish, Finnish, French, Italian, Norwegian, Dutch, Portuguese, Romanian, Swedish, Swiss, Russian, Polish, Czech, Hungarian, Turkish, etc.

Your Laptop must be of the same language. For example: you want Polish language, your laptop must be in Polish.

Installation tips:

• When you install any of the software, turn off your anti-virus and firewall, otherwise the files may be corrupted or deleted.
• Win 7 32-bit compatible only, you can install a Virtual Machine to run it on 64-bit system, Win 7, Win 8, Win 10.
• When you connect the device to the car, make sure the car voltage is above 13V.
• Do not install two different versions on the same computer, it may corrupt the probe. Make sure to properly uninstall an old version before installing a new one.

Installation procedure for V178 (video installation is available for +V200)

• Uninstall the previous version of CAN-Clip if you have not already done so.
• If this is your first installation: run Crack.reg from the folder.
• "Crack ! CAN-Clip" FIRST!
• Once you have completed these steps, install CAN-Clip.
• After the end of the installation and the reboot, you will get SPX Registration....
• To avoid PERMANENTLY, follow these steps:
• Alt+Ctrl+Del (End of task for the RSRWin.exe process)
• Delete RSRWin.exe (in C:\Windows)
• Use Regedit (and delete the "ALL" values with the name RSRWin)
• Restart your PC !!!
• NO MORE alerts for SPX registration...
• Before your first run of the program, do these steps:
• You need to have 1 car
• Connect your Clip Sonde Can interface to your car (OBD Slot)
• Turn on the ignition (NOT the engine, long press the button with the gear engaged)
• Connect your Clip Probe Can interface via a USB cable to your computer.
• Start installing ALL the drivers (they will appear) and you can find them in :
• C:\WINDOWS\system32\drivers or from this DVD in the "CAN-Clip Drivers" folder.
• You must INSTALL 4 Drivers (4 times the same thing)
• Once the installation is complete, DO NOT run your CLIP !!!
• Copy the file RSRwin.ext in C:\CLIP_X91\Lib\Application
• Then, run your CLIP, choose "Register me now" and in the next window, select "NO" !
• Use this key for registration: 333DEF-111DEF-222DEF-221DEF-000DEF

Purchase content:

1 x INSTANT Access to CAN Clip V215 download

/ !\ The laptop shown in the main picture is not included in the software purchase / !\