DIAGBOX is a complete diagnostic tool for Citroën, Peugeot and DS.
The diagnostic software is :
- PP2000 for Peugeot from 1995 to 2006.
- Lexia 3 for Citroën from 1995 to 2006.
- Diagbox v7.83 for all vehicles of the PSA group until 2016, works only under Windows 7 in 32 bits (Integrates PP2000 and Lexia 3).
- Diagbox v9.125 for all the vehicles of the PSA group until 2022, works under Windows 7, 8, 10 in 64 bits (Integrates PP2000 and Lexia 3).(pre-installed on VMWARE partition)
>> Click here to access only the Diagbox software sheet 9.125
Variants :
- FULL CHIP is the top of the line manufacturing diagnostic box, it is more stable in diagnostic functions, parameter reading, ECU configuration and ECU programming. With 12V wiring.
Diagnostics are performed via the OBD2 connector (found near the steering wheel) or via the manufacturer specific connector (only for older cars, pre-2001).
Unlike other universal diagnostic tools that only read fault codes or generic functions, this software performs almost ALL the functions of the dealer's original diagnostic tool.
The only missing functions are the online operations requiring access to the PSA servers.
Please note that the default version of the Diagbox CD is V7.83, it is the most stable and easy to use. If you order the V9.91-9.125 version, it will be automatically sent by email after purchase.
This version of DIAGBOX will allow you to perform the following operations :
- Reading and deleting error codes
- Reading of parameters (recording and graphic display)
- Test of actuators
- ECU configuration
- Coding (injectors, electronic valves, rim size, equipment level, etc.)
- Calibration and self-learning (drain interval calibration, EGR valve replacement, FAP, etc.)
- Reset of maintenance indicators
- Etc.
You can communicate with the following ECUs:
- Diesel/petrol injection
- Automatic gearbox
- Central Cabin Unit (UCH)
- ABS/ESP
- Airbag
- Air conditioning
- Instrument panel
- Comfort systems
- Power steering
- Controlled suspension
- Etc.
Engine :
- Engine ECU diagnosis
- Diagnosis of the injection computer (diesel, gasoline, flex-fuel, gas, etc.)
- Injector programming
- EGR valve calibration
Braking :
- Diagnosis of ABS and ESP ECUs
- Diagnosis and maintenance of the parking brake
- Brake system bleeding
Pollution :
- Diagnosis and regeneration of the particle filter
- Adblue module control
- Electronic control of pollutant emissions
- Lambda sensor check
Maintenance :
- Reset/initialization of the maintenance/change counter
- Bleeding of the various fluids (brakes, cooling)
- Read/clear engine faults
- Maintenance of the particle filter
Air conditioning :
- Complete diagnosis of the electronic and mechanical system
- Reading of the cooling system parameters
- Test of the controls
Ground handling :
- Electronic tire size configuration
- Electronic tire configuration (winter/summer)
- Tire pressure adjustment
- Electronic valve configuration
- Steering angle sensor calibration (steering angle initialization)
Safety:
- Activation of safety airbags (locking/unlocking)
- Configuration of a new airbag ECU
- Diagnosis of airbag ECUs
- Configuration of the rain sensor
- Configuration of the automatic headlight activation
- Activation of the xenon headlights
- Activation of the reversing radar
Equipment :
- Double dice
- Activation of the car radio
- Configuration of CD charger
- Alarm activation/configuration
- Hitch configuration
- Bicycle hitch configuration
Language supported by Diagbox :
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungarian, Greek, Czech.
Installation tips :
- PP2000 and LEXIA 3 must be installed only on Win XP 32 bit,
- DIAGBOX v7.83 must only be installed on Win7 32 bit.
- Do not install LEXIA 3 and PP2000 on the same computer as DIAGBOX.
- The DIAGBOX software already includes the PP2000 and LEXIA 3 software.
- When you install one of the softwares, turn off your anti-virus and your firewall, otherwise the files may be corrupted or deleted.
Watch out for updates :
- Please CUT the file "C:AWRoot\bin\fi\APPDIAG.SYS" before updating, and then click "update package".
- After the complete update, please PASTE the cut file into the previous folder, which can avoid the activation problem.
- Password for updates of DIAGBOX :
- 02-7.76 : scary01
- 76-7.82 : Maitresox01
- 82-7.83 : Very Simple!
Contents of the DIAGBOX package :
1x Diagbox interface (Lexia 3 - PP2000) [ALL VERSIONS] 2x Long and short USB cable [ALL VERSIONS
2x USB cable long and short [ALL VERSIONS]
1x 12V clamp cable [NORMAL, FULL CHIP only]
1x DVD containing DIAGBOX v7 57 or v9 91 (Lexia 3 - PP2000 included) [ALL VERSIONS]
Diagbox v7.83 for all PSA group vehicles until 2016, works only under Windows 7 in 32 bits. (not very simple installation)
Diagbox v9.125 for all vehicles of the PSA group until 2022, works under Windows 7, 8, 10 in 64 bits.(Includes PP2000 and Lexia 3).(pre installed on VMWARE partition)