OPCOM is a complete diagnostic tool for OPEL and VAUXHALL vehicles.
The tool allows you to connect to OPEL and VAUXHALL vehicles and some SAAB and CHEVROLET models to perform the diagnosis of all ECUs.
The diagnostic software is :
- OPCOM 200603a, which supports vehicles from 2011 to 2021 and runs on all versions of Windows in 32 or 64 bits and is compatible with :
Diagnosis is performed via the OBD2 connector (located near the steering wheel)
This version of OPCOM will allow you to perform the following operations :
- Reading and deleting error codes
- Reading of parameters (recording and graphic display)
- Test of actuators
- ECU configuration
- Coding (injectors, electronic valves, rim size, equipment level, etc.)
- Calibration and self-learning (drain interval calibration, EGR valve replacement, FAP, etc.)
- Reset of maintenance indicators
Top 10 reasons to get OPCOM 2021 200603a.
Covers almost all Opel cars, even new cars with CAN-BUS based diagnostics, such as Vectra-C, Astra-H, Zafira-B.
The program allows you to read and delete error codes, displays data in real time.
The program supports many control units, such as engine, automatic transmission, ABS, airbag, engine cooling module, dashboard, electronic air conditioning, body control unit.
Since Opel uses many pins in the OBD connector, the diagnostic interface works as a multiplexer and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 - Serial link (ISO9141, KW81, KW82, KWP2000)
Error codes with all available information are displayed:
Description, full text of the error code, full information about the error status (Present, Not present, Intermittent).
You can print, save or copy the error codes in any other application. From the Error Codes window, you can directly access the Measurement Blocks window.
The program displays the information of measurement blocks on many control modules, you can choose what you want from the list.
The program is able to display 8 measurement block parameters at the same time. The sampling rate depends mainly on the communication protocol. For example, the old system, such as Omega-B X 25 DT Engine (ISO-9141-2) can be very slow during communication, while the new Multitech or Bosch units are faster (using KWP-2000) and the latest CAN-based control units are very fast!
You can also perform output tests on many controllers.
PIN6 - PIN14 - PIN3 - PIN11 - PIN1
HSCAN - CAN-BUShigh-speed dual wire, 500 kbps
MSCAN - CAN-BUSA two-wire, medium-speed, 95 kbps
SWCAN - CAN-BUS single wire, low speed, 33.3 kbps
You will receive feedback on the status of the activated output. With OP-COM, you can learn the immobilizer keys and remote keys from the central port block.
You can also reset and program the following immobilizer-related items: ECM, BCM, IPC.
You will need the vehicle security code, which is located on the CAR-PASS.
You can also reset and program the service interval reminder on the Astra-G, Zafira, Corsa-C and Meriva.
You can encode the SAB6 and SAB8 airbags with the software.
(Not all car models can support these functions).
Contents of the OPCOM package :
1x OPCOM Diagnostic Interface 1.99
1x OPCOM Software 200603a
/!It is important to note that we are not responsible for any misuse of the tools, software or files.
We assume no responsibility for any damage caused to your ECU if incorrect files are used or if an error is made!